Interpreting Results and Reading Measurements with the YR06231 Electrohydraulic Operating Table
The YR06231 Electrohydraulic Operating Table is an advanced piece of medical equipment designed for optimal performance in clinical settings. Understanding how to interpret results and read measurements is crucial for healthcare professionals to ensure the safety and effectiveness of procedures performed on this table. This article delves into the technical specifications, operational features, and measurement interpretation techniques relevant to the YR06231.
Technical Specifications of the YR06231
| Feature | Specification |
|---|---|
| Model | YR06231 |
| Length/Width | 2100/550 mm |
| Height Adjustment (electric) | 700-1000 mm |
| Trendelenburg (electric) | ±30° |
| Lateral Tilt (electric) | ±20° |
| Back Section (electric) | 75°/-35° |
| Head Board (manual) | 60°/-90° |
| Leg Board (manual) | 15°/-90° |
| Built-in Kidney Elevator (manual) | 0-120 mm |
Understanding the Electrohydraulic System of the YR06231
The YR06231 utilizes a hydraulic system to facilitate smooth and silent operation. This system is crucial for minimizing disturbances during surgical procedures, allowing for precise adjustments without compromising the patient's stability.
Key components of the hydraulic system include hydraulic cylinders that control the table's movements, such as height adjustment, tilt angles, and back section positioning. Understanding these components aids in interpreting the operational parameters and expected measurements during use.
Reading Measurements from the YR06231
Properly reading the measurements displayed on the YR06231 is essential for accurate patient positioning and procedure execution. The table features a control panel that displays height, tilt angles, and adjustments in real-time.
To effectively interpret these measurements, operators should familiarize themselves with the units used (e.g. millimeters for height adjustments). Understanding the normal ranges for adjustments can help ensure that the table is set correctly for various procedures, avoiding complications.
Common Misinterpretations of Measurements
Healthcare professionals may encounter common misinterpretations when reading measurements from the YR06231. For instance, confusing degrees of tilt or height adjustments can lead to improper positioning.
To mitigate these errors, regular training and practice in using the YR06231's features are recommended. Establishing a checklist for confirming measurements before procedures can also enhance accuracy and patient safety.
Practical Exercises: Worked Examples in Measurement Interpretation
To solidify understanding, let’s look at a practical exercise. A surgeon requires the table to be adjusted to a height of 800 mm and a Trendelenburg angle of 15°.
- Check the current height displayed on the control panel and adjust accordingly, ensuring it matches 800 mm.
- Next, set the Trendelenburg angle to 15° by using the hydraulic controls, confirming the adjustment on the display.
These types of exercises are beneficial for honing skills in using the YR06231 effectively.
Site Requirements and Environmental Conditions for Optimal Use
For optimal operation and to ensure accurate measurements, certain site requirements must be met. The YR06231 should be placed in an environment with controlled temperature and humidity levels.
Moreover, the electrical supply must match the specifications of the YR06231 to avoid malfunctions. Implementing a site-preparation checklist can ensure all conditions are met before installation.
Frequently Asked Questions
How do I interpret height measurements on the YR06231?
Height measurements on the YR06231 are displayed in millimeters. Adjust the height according to the procedure's requirements and confirm the setting on the control panel, ensuring it is within the specified range.
What are the common errors in measurement reading on the YR06231?
Common errors include misreading the tilt angles or height settings and not verifying the adjustments against procedural requirements. It's crucial to double-check all settings before initiating any operations.
What training is recommended for using the YR06231 effectively?
Regular training sessions focused on the operational features of the YR06231, including reading measurements and interpreting results, help maintain proficiency and ensure patient safety.
Can the YR06231 be used in different surgical settings?
Yes, the YR06231 is designed for versatility and can be configured for various surgical settings, including general surgery, orthopedic procedures, and more, adapting to the specific needs of each procedure.
What are the troubleshooting steps if the table does not power on?
If the YR06231 does not power on, first check the power supply and connections. Ensure the main switch is on and verify that the electrical outlet is functioning. If the issue persists, consult the user manual for specific troubleshooting guidance.
If you are looking for a fusion of innovation and quality, you have come to the right place. At Kalstein, we offer you the luxury of exploring our exclusive catalog of laboratory equipment. We manufacture every device to the highest standards of excellence. Our intuitive and seamless online purchasing channels are designed for your convenience, securing the most competitive prices. Hesitate no longer — we bring science to life, it is time to become part of our community.